A dishwasher is a great tool that can make a notable difference in the time and effort you spend cleaning your dishes. If they aren’t taken care of properly, they might run into several issues that require the attention of a plumber near me in Illinois. One of those problems is a tripping breaker. There are several reasons your dishwasher may be tripping the breaker. Understanding them can help you remedy the problem. What do these issues include?
If your dishwasher is frequently tripping the circuit breaker, you should have a plumber near me in Illinois check the type of plug the unit is plugged into. GFCI plugs are designed to detect changes like interruptions and surges in power.
If it constantly trips and has a GFCI plug, the dishwasher is not getting a constant power flow while in use. Instead, it uses greater power at particular points in the cycle, which means it will
experience problems and possibly trip the GFCI socket, turning off the breaker. This is a common problem, so if the dishwasher is hooked into this kind of connector, you should have a plumber near me in Illinois switch to a standard plug or rewire the specific socket to a standard one.
Heating Element Issues
Yes, your dishwasher also has a heating element in its basin at the bottom of the appliance. The heating element is exposed, making it prone to being hit by your dishes and could potentially be damaged. Should the heating element be damaged or malfunction, it could trip the unit’s circuit breaker because it is hazardous. If the heating element is faulty, your dishwasher will not function efficiently.
If your dishwasher has a faulty heating element, then you should have a plumber near me in Illinois come for a replacement service. Pulling the element out and replacing it is easy. First, the technician will turn off the dishwasher and unplug it from the power. They will then remove the old element, replace it with a new one, and turn it back on to determine if the problem is resolved.
Shortened Transient Voltage Suppression Diode or Transorb
A transorb is an electrical wiring component used to help in protecting your dishwasher from sudden spikes in voltages which might cause serious damage to the unit. The sudden spikes arise when there is something such as a lightning strike, or there is a short circuit in your house. In some instances, the transorb might become shortened and end up causing problems like tripping the circuit breaker and damaging the breaker.
This differs from problems you can try resolving by reading the user manual or some DIY videos on YouTube. Rather, you should contact a plumber near me in Earlville, IL to inspect the dishwasher and repair or replace the transient voltage suppression diode. The professionals are trained in safely handling electrical appliances to avert any electrocution or injuries. When the professional repairs the transorb, they will connect the dishwasher to see if the issue has been resolved. A shortened transorb requires a replacement for it to work properly.
Faulty Wash Motor
Every dishwasher has a motor that helps it move or rotate the water around the dishwasher. If the motor is faulty or not working, it might result in power surges that could trip the circuit. If the wash motor is faulty or isn’t properly working, it can make the motor draw more power than it is typically supposed to. Eventually, this will make the circuit breaker trip.
The easiest way of repairing or resolving this issue is to have a plumber near me in Illinois replace or repair the wash motor. It will be simplest to replace the wash motor to resolve this problem. The professional will drain the dishwasher’s water before getting to the engine through the bottom. After they drain the water and, to avoid being shocked, turn off the dishwasher’s electricity. The motor may then be accessed by removing the washer’s bottom, which can be changed as necessary.
Short-Circuiting or Loose Connections
The dishwasher uses different electrical connections and connectors that allow it to function properly and provide the necessary power supply to the various components for an effective wash cycle. If the connectors aren’t properly hooked and have faulty wiring or short-circuiting, they can make the entire circuit trip to avert fire outbreaks. The best way to resolve this issue is to have a plumber near me in Earlville, IL inspect the wiring and connectors. You must either replace the wires or fix them if you detect that they aren’t connected properly, are broken, or are loose.
Control Circuit Board Issues
The last problem that could be the reason for the frequently tripping breaker is a faulty circuit board. A circuit board is an electronic component that controls your dishwasher’s functionalities. As the dishwasher ages, the circuit board also ages and starts malfunctioning, resulting in frequent breaker trips. If the circuit board is old and making the breaker trip, you should have a plumber near me in Illinois replace it. Don’t try doing the replacement yourself.
It shouldn’t be hard to have a plumber come to your home and replace your circuit board, provided the dishwasher’s body is still intact, allowing you to continue using it to wash dishes. Dishwashers may be finicky, and even a minor issue with the board could result in a short circuit that would shut off the electricity and cause your entire dishwasher to malfunction.
If your dishwasher is tripping the circuit breaker constantly, that could be caused by either of the issues above. No matter the reason, you shouldn’t try repairing the unit yourself. Rather, enlist the assistance of a professional plumber near me in Earlville, IL to inspect the unit, diagnose the underlying problem, and fix it. For Any plumbing service, contact our professionals at Just In Time.